WH5000 SHAFT AND IMPELLER (Old Design).

This is the WH5000 for the old model design. Therefore this part will only fit your pump if you have the old design of the WH5000/10 pump. If you are unsure of which model you have, please send us a picture of your pump to shop@waterhouse.co.za and we will match the correct impeller for you.

The Impeller is a plastic and magnetic spare part in a pump. This part is found inside the pump, which is used to drive the water through and out of the pump, and the 6 month warranty is limited due to wear and tare.

Care needs to be taken when fitting this impeller to this particular model.

Application:

Impellers are used on specific pumps and models.
It is advised that you use the exact size impellor for a specified pump model.
Note: impellers need to be cleaned now and then to increase their life span, as they can get worn out and the dirt can cause the pump to get clogged or break the impellor.

Additional information

Weight	1 kg
Dimensions	10 × 10 × 2 cm

WH5000 SHAFT AND IMPELLER (OLD DESIGN)